Description

The 48V lithium-ion battery has good safety performance and built-in overcharge protection. This type of battery has undergone thousands of repeated discharges and safety tests. The battery performance is safe and reliable.

NOTE: There are two versions of this battery: NEW and OLD. The dimensions are different on the versions and the NEW is 12A while the OLD is 10A. Please check carefully based on your current battery. (See image)

Features

Easy to Install: Lockable and removable

Brand: NAKTO

Range: A fully charged battery can last up to 22 miles

To Fully Charge: 4-6 hours

Q&A

Important things to remember:

Nakto cannot supply duplicate keys for this battery so be careful. You may be able to have a duplicate key made at your local hardware store – do this immediately to insure you have a duplicate in case of loss.

Nakto can supply an entire lock set which can be installed in the battery case (see video further down this page)

When charging the battery, ALWAYS connect the battery and charger first. Then plug the charger into the wall. Not doing this can blow the battery fuse.

How to take the battery out of the bike.

1. Flip the seat down; there is a small blue bar under the seat. Pull that bar up to remove the battery, then put the seat back.

2. While pushing the key in, turn the battery key counter-clockwise to unlock. Pull the battery out.

If the charger light is always green when charging does this indicate a battery problem?

If the light is always green when charging, this typically indicates that the fuse is bad. Replace the fuse. (see video below)

How to Replace the Battery Fuse

How to Replace the Bike Key Set